• Advertisement

Dellorto FHC 2013

Use this forum to discuss small engines, and the equipment or machinery that they power. This is the main section for any technical help posts and related questions.

Dellorto FHC 2013

Postby moomoo » Tue Mar 25, 2014 11:14 pm

Hello,
I'm new to the forum and I.m desperate for some help/information.
My Suffolk punch 35s will only run with the choke on full....if I try to run it without the choke (ie choke flap half or fully open) it cuts out. It will run and mow the grass but it splutters and coughs and then the plug needs cleaning before it will start again. I bought the mower second hand and I fear the carb has been tampered with and I wanted to know if anyone knows how to set the carb up from scratch...its a Dellorto 2013A...Its quite old so maybe some parts maybe worn...Does anyone know which parts maybe suspect?...Also does anyone have a diagram with the parts menu?....Lots of question I know but any help would be gratefully welcome.
moomoo
 
Posts: 2
Joined: Tue Mar 25, 2014 10:53 pm

Advertisement

Re: Dellorto FHC 2013

Postby bobodu » Wed Mar 26, 2014 6:06 am

Found parts and whole carbs...You have to type in "FHC" in the general description area.
http://www.dellorto.co.uk/merchandise/product_search.asp
Mostly like you have a plugged up jet.
Looks like it crosses to a Tecumseh 23020142
There are links to diagrams here
https://www.google.com/#q=+Tecumseh+23020142
"Give me a fast ship, for I intend to go into harm's way."
User avatar
bobodu
Forum Moderator
Forum Moderator
 
Posts: 1117
Joined: Sun Nov 03, 2013 2:03 pm
Location: Fort Wayne, Indiana.

Re: Dellorto FHC 2013

Postby moomoo » Wed Mar 26, 2014 7:20 am

Thanks bobodu I'll pore over that for a while and see if it helps me out at all. I'll clean the main jet also...see if that helps. Thanks once again.
moomoo
 
Posts: 2
Joined: Tue Mar 25, 2014 10:53 pm

Re: Dellorto FHC 2013

Postby bobodu » Wed Mar 26, 2014 8:52 am

"Give me a fast ship, for I intend to go into harm's way."
User avatar
bobodu
Forum Moderator
Forum Moderator
 
Posts: 1117
Joined: Sun Nov 03, 2013 2:03 pm
Location: Fort Wayne, Indiana.


Return to Technical Discussion Forum

Who is online

Users browsing this forum: No registered users and 3 guests