• Advertisement

High RPM's on start-up....

Use this forum to discuss small engines, and the equipment or machinery that they power. This is the main section for any technical help posts and related questions.

Re: High RPM's on start-up....

Postby mwerles » Wed May 07, 2014 7:24 am

I wonder why 38 racing's post wasn't there when I posted?
Les
mwerles
Forum Regular
 
Posts: 57
Joined: Fri Nov 08, 2013 5:31 pm

Re: High RPM's on start-up....

Postby KE4AVB » Wed May 07, 2014 7:40 am

mwerles wrote:I wonder why 38 racing's post wasn't there when I posted?
Les

Don't know it like some of my PM's that just disappears completely without me deleting them. I know of three PMs to Brian that just disappeared asking about parts.

Probably just a minor program problem that will probably get fix in the version or the database just had to re-index.
The truest measure of society is the how it treats its elderly, its pets, and its prisoners.
User avatar
KE4AVB
Forum Pro
 
Posts: 6259
Joined: Mon Nov 04, 2013 11:23 am
Location: TorLand

Re: High RPM's on start-up....

Postby Deere2me » Wed May 07, 2014 7:48 am

GoatDriver wrote:

Deere2me wrote:Instead of arguing the point that everything is OK ( when CLEARLY it isn't) ya might wanna go ahead and static set the gov., as was suggested, then go from there.
It's hard to tell from yer pic, but the gov. arm looks messed up or not in the right position...


I'm not arguing the point, I said "everything looks fine" but some are not perfect like you and I might have overlooked something. :?:


Perfection, really doesn't have much to do with it, now does it? COMMON SENSE, on the other hand...
Oh, and by the way, thanks for the compliment!!

Ya think?????

Anyway, good to hear ya got it fixed.
http://ppeten.com/forums/viewtopic.php?f=4&t=836

I quote:
"Don't pay any attention to old Dummy."- okie
"pompous a**hole"- steinuit13
"I agree, Deere is a negative around here to say the least"-mek a nik
Nice, huh?
User avatar
Deere2me
Forum Pro
 
Posts: 439
Joined: Wed Jan 01, 2014 2:27 pm
Location: Chesapeake, VA

Re: High RPM's on start-up....

Postby bgsengine » Wed May 07, 2014 7:53 am

@KE4: Or, it could have failed to submit - PM's have mailbox limits, sending rate limits, and the like..and I have noticed messages can go missing if in a hurry and havent been submitted - you can easily check by looking at your outbox tab (and also tells you if a message has been read or not)

@les: Could easily have been 2 people posting a message at the same approximate time - if 38racing's post wasnt there when you posted, he coulda been in the middle of writing it, and then posted it while you were in the process of making your own post.

Or, since there's some mention of a 6 hours lapse, you could have very simply missed seeing it. again wouldn't be the first time, especially on a multi-page thread... even I have been known to miss details like that or info from earlier posts.
How poor are they who have not patience. What wound did ever heal, but by degrees? - Iago (Othello Act II, Scene 3)
bgsengine
Briggs MST
Briggs MST
 
Posts: 3409
Joined: Sun Nov 03, 2013 10:07 pm
Location: Northcentral P.A.

Re: High RPM's on start-up....

Postby KE4AVB » Wed May 07, 2014 8:14 am

bgsengine wrote:@KE4: Or, it could have failed to submit - PM's have mailbox limits, sending rate limits, and the like..and I have noticed messages can go missing if in a hurry and havent been submitted - you can easily check by looking at your outbox tab (and also tells you if a message has been read or not)

Oh they were there in the outbox which I do check after posting as I do double check myself but they were gone a few hours later. These were fairly short messages like "Can you get Echo part number ########## and what is your price?" or "Can you get a 18" 240 Homelite bar?. I usually keep the boxes at or under 3%. The messages in outgoing box usually stay until read and then are transfer to sent box.
The truest measure of society is the how it treats its elderly, its pets, and its prisoners.
User avatar
KE4AVB
Forum Pro
 
Posts: 6259
Joined: Mon Nov 04, 2013 11:23 am
Location: TorLand

Re: High RPM's on start-up....

Postby 38racing » Wed May 07, 2014 11:05 am

mwerles wrote:I wonder why 38 racing's post wasn't there when I posted?
Les

I am a Canuck, maybe got held up at the border.
38racing
Forum Pro
 
Posts: 2381
Joined: Thu Nov 07, 2013 10:12 pm
Location: Ontario Canada

Previous

Return to Technical Discussion Forum

Who is online

Users browsing this forum: No registered users and 4 guests

cron