-
- Advertisement
PTO side bolt on a TVM220
4 posts
• Page 1 of 1
PTO side bolt on a TVM220
by makeemrun » Tue Jul 08, 2014 10:57 am
Just wondering if anybody remembers what size bolt goes into a crankshaft on a TVM220-157280l MOTOR.
- makeemrun
- Posts: 14
- Joined: Fri Nov 15, 2013 2:42 pm
Advertisement
Re: PTO side bolt on a TVM220
by bgsengine » Tue Jul 08, 2014 11:26 am
Whatever size they spec it for, but typically would be a fine thread 7/16-20 - might could be 1/2-20 or 3/8-18 but unlikely. if you mean the PTO end of the crank to bolt up whatever pulley or accessory it connects to.
How poor are they who have not patience. What wound did ever heal, but by degrees? - Iago (Othello Act II, Scene 3)
- bgsengine
- Briggs MST
- Posts: 3409
- Joined: Sun Nov 03, 2013 10:07 pm
- Location: Northcentral P.A.
Re: PTO side bolt on a TVM220
by smallen » Tue Jul 08, 2014 7:07 pm
crank drawing shows to be 3/8-24 thread
- smallen
- Forum Regular
- Posts: 52
- Joined: Tue Nov 05, 2013 6:10 pm
4 posts
• Page 1 of 1
Return to Technical Discussion Forum
Who is online
Users browsing this forum: No registered users and 2 guests