Mclane Reel Pulsa Jet Carb with pics

[jimmyfingers]

Okay Got it KE4AVB. I appreciate your effort in helping me.

When I took the carb off it did not have this screen.

[jimmyfingers]

Does anyone know what pt number this is. I can't seem to find it in the IPL

[bgsengine]

Yup, and the 120 degree one that goes in the valve cover is 692187 (I sell a crapload of both grommets on ebay - usually have between 5 to 25 on the shelf at any given time) The aluminum breather tube is rarely ever replaced as it is rarely ever damaged or worn out...

[bobodu]

The aluminum breather tube is rarely ever replaced as it is rarely ever damaged or worn out...

The only one I ever had to replace was one I ran over with the tricycle wheels of a 1945 Allis-Chalmers WC.....
I don't mind living in the burbs but I miss that tractor.

[bobodu]

I see two parts there...I assume you must mean the grommet...Briggs & Stratton 692189 Grommet Replaces 67838 692189.

https://www.google.com/#q=Briggs+%26+Stratton+692189+Grommet

[bgsengine]

The aluminum breather tube is rarely ever replaced as it is rarely ever damaged or worn out...

The only one I ever had to replace was one I ran over with the tricycle wheels of a 1945 Allis-Chalmers WC.....
I don't mind living in the burbs but I miss that tractor.

Whats living in the burbs got to do with it? Park one in your driveway or build a garage addition .. better yet get one for your lake camp...

[jimmyfingers]

I seemed to have lost one of these small screws that screws the diapharm on and I cannot figure out what the part number is

[StarTech]

[StarTech]

and the part number for the screw is 691619.

[jimmyfingers]

Thanks mate. I pulled that pic off a ebay photo.