Kohler CH22

[geppsr]

I need apicture of a kohler ch22 pto clutch installed on this engine. Took it off 6 months ago and i am not sure how to put it back on the engine.I dont know how to bolt it back on. Appreciate any help. Thanks, Gepp

[bgsengine]

PTO clutches are specific to the equipment, would be more helpful if you have equipment make, model, serial we could link you a parts diagram

[geppsr]

Machine is a 2002 Toro 5xi series garden tractor. model #73561 ,Ser. # 20000242 with a kohler command ch22s engine. I would also like to know how to set valves before trying to start engine. I appreciate any and all info i can get . memory just isnt the same at 75 anymore. thanks, gepp

[Deere2me]

Machine is a 2002 Toro 5xi series garden tractor. model #73561 ,Ser. # 20000242 with a kohler command ch22s engine. I would also like to know how to set valves before trying to start engine. I appreciate any and all info i can get . memory just isnt the same at 75 anymore. thanks, gepp

Go to TORO website and punch in yer numbers, all the info ya need:https://lookup3.toro.com/request/request.cfm Kohler here:http://www.kohlerengines.com/manuals/landing.htm

[KE4AVB]

Yet another delay on moving...

geppsr, The Kohler CH22 (CH22S-PS-66545) has hydraulic lifters so the valves are not adjustable. As for the PTO clutch it is simply held on by one bolt and has a clutch retainer pin (item 27) that must engaged in PTO Clutch hub to prevent it from spinning around. PTO retaining bolt is torqued around 50-55 ft lbs. Don't forget to put the clutch spacer on first (item 28).

http://www.jackssmallengines.com/Jacks-Parts-Lookup/Model-Diagram/TORO/33774/4943

[geppsr]

Thanks everyone for all the help. Gepp