• Advertisement

Honda GXV120 carburetor

Use this forum to discuss small engines, and the equipment or machinery that they power. This is the main section for any technical help posts and related questions.

Honda GXV120 carburetor

Postby Ron » Mon Sep 15, 2014 7:15 pm

Honda HR214SX self propelled mower
Honda GXV120 engine
Fuel leaking out of carb. Removed & cleaned with ultrasonic cleaner. Back on and still leaks. Removed needle, held my finger over hole, blew in fuel inlet and could here air. Soapy water confirmed it is leaking around the plastic seat. When looking at parts list, I don't see that the seat is included with either the float set pn16013-ZEO-005 or the inlet needle pn 16013-ZEO-005. Any knowledgable Honda people that can help?
Ron
Guide
 
Posts: 131
Joined: Wed Mar 05, 2014 10:14 am

Advertisement

Re: Honda GXV120 carburetor

Postby bgsengine » Mon Sep 15, 2014 7:42 pm

You need a new carb,. they're actually relatively cheap - most of them - of you can find aftermarket ones for as little as 16 bucks
How poor are they who have not patience. What wound did ever heal, but by degrees? - Iago (Othello Act II, Scene 3)
bgsengine
Briggs MST
Briggs MST
 
Posts: 3409
Joined: Sun Nov 03, 2013 10:07 pm
Location: Northcentral P.A.

Re: Honda GXV120 carburetor

Postby Ron » Mon Sep 15, 2014 7:46 pm

So, that plastic seat isn't changeable? Cheapest I found it was 65.00 + shipping.
Ron
Guide
 
Posts: 131
Joined: Wed Mar 05, 2014 10:14 am

Re: Honda GXV120 carburetor

Postby smallen » Mon Sep 15, 2014 8:41 pm

post vin number, will look it up, seat is not replacable
smallen
Forum Regular
 
Posts: 52
Joined: Tue Nov 05, 2013 6:10 pm

Re: Honda GXV120 carburetor

Postby 38racing » Mon Sep 15, 2014 9:23 pm

Ron wrote:So, that plastic seat isn't changeable? Cheapest I found it was 65.00 + shipping.

https://www.bantasaw.com/catalog/viewpr ... 116&p=6532
and that 50 is CDN$ so only about $45 US.

but even cheaper right in USA. http://www.amazon.com/Honda-Gxv120-Engi ... B00GXU772K
38racing
Forum Pro
 
Posts: 2381
Joined: Thu Nov 07, 2013 10:12 pm
Location: Ontario Canada


Return to Technical Discussion Forum

Who is online

Users browsing this forum: No registered users and 5 guests