• Advertisement

Primer bulb not working

Use this forum to discuss small engines, and the equipment or machinery that they power. This is the main section for any technical help posts and related questions.

Primer bulb not working

Postby barrentine934_+ » Sun Nov 30, 2014 12:58 pm

Hey guys,I have a stihl FS130R weed eater.It would not crank and no gas was in the primer bulb so I removed the carb disassembled ,cleaned installed new kit ressembled.I put new fuel lines and fuel filter on.It runs great now but primer bulb still not working.any suggestions.
barrentine934_+
 
Posts: 34
Joined: Tue Feb 18, 2014 6:21 pm

Advertisement

Re: Primer bulb not working

Postby KE4AVB » Sun Nov 30, 2014 1:33 pm

Zama C1Q-S98

I would said fuel lines connect backwards but you wrote it now rums great so that won't be the issue.

The primer base PN A056106 is either clogged and its check valve(s) are struck. You can try several cleaning in an Ultrasonic cleaner to unclog them. Sometimes it works but not all the time. Don't try probing them as they are tiny flat pieces of rubber with a tiny springs holding closed; easily damaged.

This part can be only purchase from a Stihl dealer.
The truest measure of society is the how it treats its elderly, its pets, and its prisoners.
User avatar
KE4AVB
Forum Pro
 
Posts: 6259
Joined: Mon Nov 04, 2013 11:23 am
Location: TorLand

Re: Primer bulb not working

Postby motorhead64 » Tue Dec 02, 2014 3:14 pm

Also, make sure the bulb itself is not the issue...cracked and leaking air? MH
motorhead64
Forum Regular
 
Posts: 75
Joined: Tue Nov 05, 2013 6:56 pm


Return to Technical Discussion Forum

Who is online

Users browsing this forum: No registered users and 3 guests