Help with Kolher Choke

[rthacker7]

KE4AVB I emailed the pics to Az Shadeguy but if you think anybody else wants to see them I will send copies to you.

[okie]

I thought an outside site was required.
I got a few pictures however the close ups are a bit blurry and the photos are large 1280x960, not sure you could tell much
with smaller photo's.
Any who I don't use photobucket so if any one wants me to e-mail them I will try. They are about 460kB each.
The choke cable comes up from underneath the air filter cover where it is secured at the bottom, then extends upward to a
bell crank. The other end of the bell crank attaches to the choke rod which meanders over to the choke plate attachment.

Send them to me and I'll see what I can do with them. Click on my username to access the email address. I'll see what I can do about resizing here.

KE4AVB-
I clicked on your name and all I get is PM (no Email add)

Travis

[KE4AVB]

Tnx, Okie

I didn't know that everyone wasn't able to use the email function just the PM. I knew I could but not that others could not; probably a default setting for new users that have been setup for spam prevention. I got remember this next time I post asking for info to be sent to me.

You might want edit out your email address as it is publicly shown to everyone. We got be very carefully about things as there are people out there that just loves to cause trouble. If wasn't for them things could be a lot better and simpler for all of us.

I setup a regular user account for myself for checking things out. After a few posts though it I should know actually what the user limits are. I know most of them but not all.

I new to administrating a BBS like this one so I still finding things out from time to time. I'll ask Brian about this but I think I already know the answer that it is for spam prevention and I can understand the reasoning behind it.

AVB

[bgsengine]

actually there is also a setting in your user control panel you can set to block email contact or allow it, at various levels. It might be in board configs whether to permit or not the ability to email members.. will hafta check

[Az Shadeguy]

rthacker7 sent me the pictures but his choke uses a cable . This one has a lever mounted to the air filter backplate.
It seems that no matter how I put it the choke rod binds

[Az Shadeguy]

Well it seems that the PO had put a different carb or at least a different choke plate and shaft on it.
I took it to a local shop that I buy parts from and he gave me a newer carb.
Thanks for all the help

[KE4AVB]

Thanks for the update.